LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical (Qr25DE)) >> Rocker Cover >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the ignition coils. Refer to "REMOVAL AND INSTALLATION ".
  2. Install a suitable jack under engine.
  3. Remove RH engine mount. Refer to "ENGINE ASSEMBLY ".
  4. Loosen the bolts in the numerical order as shown using power tool.
    5. Fig 1: Rocker Cover Bolt With Loosening Sequence
    G04924782Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove the rocker cover. Remove the oil filler cap and PCV valve if necessary, to transfer to the new rocker cover.
scientia non olet · About LEMON Manuals