LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical (Qr25DE)) >> Oil Seal >> Removal and Installation of Front Oil Seal >> Removal

Removal and Installation of Front Oil Seal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the following parts:
    • Engine under cover using power tools.
    • Drive belts. Refer to "DRIVE BELTS ".
    • Crankshaft pulley. Refer to "TIMING CHAIN ".
  2. Remove front oil seal from front cover.
    CAUTION: Be careful not to scratch front cover.
    Fig 1: Replacing Front Oil Seal
    G04886025Courtesy of NISSAN MOTOR CO., U.S.A.