LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical (Qr25DE)) >> Ignition Coil >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine cover.
  2. Remove air duct. Refer to "REMOVAL ".
  3. Disconnect the harness connector from the ignition coil.
  4. Remove the ignition coil.
    CAUTION: Do not drop or shock it.
scientia non olet · About LEMON Manuals