LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical (Qr25DE)) >> Cylinder Block >> How to Select Piston and Bearing >> How To Select A Piston >> Piston Selection Table

Piston Selection Table

WARNING: This page is about a different variant/trim than selected.
PISTON SELECTION TABLE

Unit: mm (in)
Grade number (Mark) 2 (or no mark) 3
Inner diameter of cylinder bore 89.010-89.020 (3.5043-3.5047) 89.020-89.030 (3.5047-3.5051)
Outer diameter of piston skirt 88.990-89.000 (3.5035-3.5039) 89.000-89.010 (3.5039-3.5043)
NOTE:
  • The piston is available together with piston pin as an assembly.
  • The piston pin (piston pin bore) grade is provided only for the parts installed at the plant. For service parts, no grades can be selected. Only 0 grade is available.
scientia non olet · About LEMON Manuals