LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System - DTCS P1148 To P2A03 (Qr25DE)) >> DTC P1574 ASCD Vehicle Speed Sensor >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

WARNING: This page is about a different variant/trim than selected.
  1. Start engine.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Drive the vehicle at more than 40 km/h (25MPH).
  4. Check DTC.
  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".