LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Cooling System (Qr25DE)) >> Thermostat And Thermostat Housing >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Perform when the engine is cold.
  1. Drain engine coolant. Refer to "CHANGING ENGINE COOLANT ".
  2. Remove front air duct. Refer to "REMOVAL ".
  3. Remove engine undercover.
  4. Remove radiator lower hose from the engine coolant inlet side.
  5. Remove engine coolant inlet and thermostat.
scientia non olet · About LEMON Manuals