Removal and Installation: Removal
WARNING: This page is about a different variant/trim than selected.
- Drain the coolant from the radiator. Refer to
"DRAINING ENGINE COOLANT ".CAUTION: Perform when engine is cold.
- Remove front air duct. Refer to "REMOVAL ".
- Disconnect radiator upper and lower hoses.
- Disconnect the reservoir tank hose
- Disconnect harness connectors from fan motors, and position harness aside
- Remove the cooling fan assembly to radiator bolts, and remove coolant fan assembly.
- Remove the radiator.CAUTION: Do not damage or scratch air conditioner condenser and radiator core when removing.