LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Cooling System (Qr25DE)) >> Engine Coolant >> Changing Engine Coolant >> Flushing Cooling System

Flushing Cooling System

WARNING: This page is about a different variant/trim than selected.
  1. Fill the radiator from the filler cap above the radiator upper hose and reservoir tank, with water and reinstall the filler cap above the radiator upper hose.
  2. Run the engine until it reaches normal operating temperature.
  3. Press the engine accelerator two or three times under no-load.
  4. Stop the engine and wait until it cools down.
  5. Drain the water.
  6. Repeat steps  1 through  5 until clear water begins to drain from the radiator.
scientia non olet · About LEMON Manuals