LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Cooling System (Qr25DE)) >> Cooling Fan >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Partially drain engine coolant from radiator. Refer to "DRAINING ENGINE COOLANT ".
    CAUTION: Perform when engine is cold.
  2. Remove Front air duct. Refer to "REMOVAL ".
  3. Disconnect radiator upper hose.
  4. Disconnect fan motor connectors.
  5. Remove radiator cooling fan assembly.
scientia non olet · About LEMON Manuals