LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting & Charging System >> Battery >> Removal and Installation QR25DE >> Removal

Removal and Installation QR25DE: Removal

  1. Loosen battery terminal nuts (A), and disconnect both negative and positive battery cables from battery terminals.
    CAUTION: When disconnecting, disconnect the battery cable from the negative terminal first.
  2. Remove battery hold-down wedge bolt (B) and battery wedge bracket.
  3. Remove battery.
    Fig 1: Identifying Battery Hold-Down Wedge Bolt And Battery Wedge Bracket
    G04928261Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals