LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SL >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiper, Washer & Horn >> Power Socket >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the center console. Refer to "CENTER CONSOLE ASSEMBLY ".
  2. Remove the instrument lower covers (LH) and (RH). Refer to "INSTRUMENT PANEL ASSEMBLY ".
  3. Remove the instrument lower cover (center). Refer to "INSTRUMENT PANEL ASSEMBLY ".
  4. Remove the power socket (1) while pressing the tabs (A) on the ring, disconnect the power socket connector.
    Fig 1: Identifying Power Socket
    G04928499Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals