System Description: Outline

Power is supplied at all times

To ignition relay, located in IPDM E/R, from battery directly,
Through 50A fusible link (letter j, located in fuse and fusible link box)
To BCM terminal 70
Through 30A fuse (No. 39, located in IPDM E/R)
To front wiper relay located in IPDM E/R
Through 15A fuse (No. 52, located in IPDM E/R) and
Through 20A fuse (No. 53, located in IPDM E/R)
To CPU located in IPDM E/R.
When ignition switch is in ON or START position, power is supplied
Through ignition relay (located in IPDM E/R)
To front wiper relay (located in IPDM E/R) and
To front wiper high relay (located in IPDM E/R) and
To CPU (located in IPDM E/R)
Through 10A fuse [No. 12, located in fuse block (J/B)]
To BCM terminal 38
Through 10A fuse [No. 15, located in fuse block (J/B)]
To combination switch terminal 14.
Ground is supplied
To IPDM E/R terminals 39 and 59 and
To front wiper motor terminal 2
Through grounds E9, E15 (all models) and E24 (with MR20DE)
To BCM terminal 67
Through grounds M57 and M61.