CONSULT-III Function (BCM): Notes
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
DIAGNOSTIC TEST MODES
| BCM diagnosis position | Diagnosis mode | Description |
|---|---|---|
| WIPER | WORK SUPPORT | Supports inspections and adjustments. Commands are transmitted to the BCM for setting the status suitable for required operation, input/output signals are received from the BCM and received data is displayed. |
| DATA MONITOR | Displays BCM input data in real time. | |
| ACTIVE TEST | Device operation can be checked by applying a drive signal to device. | |
| BCM | SELF-DIAG RESULTS | BCM performs self-diagnosis of CAN communication. |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. |