LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Parking, License Plate And Tail Lamps >> Removal and Installation >> License Plate Lamp >> Removal

License Plate Lamp: Removal

  1. Remove the license lamp finisher. Refer to "LICENSE LAMP FINISHER ".
  2. Remove license plate lamp screw (A) and remove the license plate lamp (1).
  3. Disconnect the license plate lamp connector and remove the licence plate lamp.
    Fig 1: Identifying License Plate Lamp Screw
    G04928372Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals