LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting & Charging System >> Alternator >> Removal and Installation QR25DE >> Removal

Removal and Installation QR25DE: Removal

  1. Disconnect the battery cable from the negative terminal.
  2. Remove drive belt. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect generator connector.
  4. Remove "B" terminal nut.
  5. Remove harness bracket and position aside.
  6. Remove generator bolts.
  7. Remove generator assembly from the vehicle.