LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical (Qr25DE) >> Oil Seal >> Removal and Installation of Rear Oil Seal >> Installation

Removal and Installation of Rear Oil Seal: Installation

  1. Apply new engine oil to new oil seal and install it using a suitable drift.
    • Install new oil seal in the direction shown.
      Fig 1: Applying Engine Oil To Both Oil Seal Lip And Dust Seal Lip
      G04878301
    • Press fit new oil seal straight using a suitable drift, to avoid causing burrs or tilting.
      Fig 2: Identifying Rear Oil Seal
      G04885797
    • Press in the new oil seal to the specified depth as shown.
      Fig 3: Identifying Cylinder Block Rear End Face Dimension
      G04878408
  2. Installation of the remaining components in reverse order of removal.
scientia non olet · About LEMON Manuals