LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical (Qr25DE) >> Camshaft >> Removal and Installation >> Inspection After Removal >> Camshaft Journal Clearance >> Camshaft Sprocket Runout

Camshaft Sprocket Runout

  1. Install the camshaft in the cylinder head.
  2. Install the camshaft sprocket on the camshaft.
  3. Measure camshaft sprocket runout while turning the camshaft by hand.

    Runout : Less than 0.15 mm (0.0059 in) 

  4. If it exceeds the specification, replace camshaft sprocket.
    Fig 1: Checking Camshaft Sprocket Runout
    G04899735
scientia non olet · About LEMON Manuals