LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Rear Drum Brake >> Disassembly and Assembly of Wheel Cylinder >> Assembly

Disassembly and Assembly of Wheel Cylinder: Assembly

CAUTION:
  • Do not use Nissan rubber grease (KRE0000010, KRE000001001) during assembly.
  • When inserting the piston, be careful not to scratch the cylinder.
  1. Apply brake fluid to the piston sliding surface on the wheel cylinder.
  2. Apply Nissan rubber lubricant (KRE1200030) to the piston cups and piston boots and assemble as shown.
    Fig 1: Identifying Area For Applying Grease To Piston Cups And Piston Boots
    G04927353
scientia non olet · About LEMON Manuals