LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Brake Tube And Hose >> Rear Brake Tube and Hose >> Installation

Rear Brake Tube and Hose: Installation

  1. Connect brake hose to brake tube on vehicle, and temporarily tighten flare nut by hand as much as possible.
  2. Secure it to bracket with lock plate.
  3. Tighten flare nut to the specified torque with a flare nut torque wrench. Refer to "HYDRAULIC CIRCUIT ".
  4. Bleed air from brake system. Refer to "BLEEDING BRAKE SYSTEM ".
scientia non olet · About LEMON Manuals