Piston Selection Table
PISTON SELECTION SPECIFICATIONS
| Unit: mm (in) | ||
|---|---|---|
| Grade number (Mark) | 2 (or no mark) | 3 |
| Inner diameter of cylinder bore | 89.010-89.020 (3.5043-3.5047) | 89.020-89.030 (3.5047-3.5051) |
| Outer diameter of piston | 88.990-89.000 (3.5035-3.5039) | 89.000-89.010 (3.5039-3.5043) |
NOTE:
- The piston is available together with piston pin as an assembly.
- The piston pin (piston pin bore) grade is provided only for the parts installed at the plant. For service parts, no grades can be selected. Only 0 grade is available.