LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Transmission (Re4F04B) >> On Board Diagnostic System Description >> OBD-II Diagnostic Trouble Code >> How To Erase Diagnostic Trouble Codes (With GST)

How To Erase Diagnostic Trouble Codes (With GST)

  1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
  2. Perform TCM self-diagnostic procedure. Refer to TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) . (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)
  3. Select Mode 4 with Generic Scan Tool (GST). For details, refer to HOW TO ERASE DIAGNOSTIC TROUBLE CODES .
scientia non olet · About LEMON Manuals