LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical (Qr25DE) >> Drive Belts >> Removal and Installation of Drive Belt Auto-tensioner >> Removal

Removal and Installation of Drive Belt Auto-tensioner: Removal

  1. Remove the front RH engine side cover.
  2. Remove the drive belt. Refer to REMOVAL .
  3. Remove the alternator. Refer to REMOVAL .
  4. Remove the drive belt auto-tensioner, using power tool.
CAUTION: Do not loosen the auto-tensioner pulley bolt. (Do not turn it counterclockwise.) If turned counterclockwise, the complete auto-tensioner must be replaced as a unit, including pulley.
scientia non olet · About LEMON Manuals