Power Supply And Ground Circuit

Power is supplied at all times:

• through 10A fuse [No. 12, located in the fuse block (J/B)]
• to combination meter terminal 25 (without tachometer), or 42 (QG18DE with tachometer), or 13 (QR25DE).

With the ignition switch in the ON or START position, power is supplied:

• through 10A fuse [No. 30, located in the fuse block (J/B)]
• to combination meter terminal 26 and 20 (without tachometer), or 41 and 6 (QG18DE with tachometer), or 14 and 7 (QR25DE).

Ground is supplied:

• to combination meter terminal 27 (without tachometer), or 48 (QG18DE with tachometer), or 12 (QR25DE)
• through body grounds M28 and M54.
• to combination meter terminal 31 (without tachometer), or 45 (QG18DE with tachometer), or 8 (QR25DE)
• through body grounds B19 and B13.