Bearing Race For Adjusting Total End Play
WARNING: This page is about a different variant/trim than selected.
BEARING RACE THICKNESS SPECIFICATIONS
| Thickness mm (in) | Part number(1) | ||
|---|---|---|---|
| 0.8 (0.031) | 31435-80X00 | ||
| 1.0 (0.039) | 31435-80X01 | ||
| 1.2 (0.047) | 31435-80X02 | ||
| 1.4 (0.055) | 31435-80X03 | ||
| 1.6 (0.063) | 31435-80X04 | ||
| 1.8 (0.071) | 31435-80X05 | ||
| 2.0 (0.079) | 31435-80X06 | ||
| 0.9 (0.035) | 31435-80X09 | ||
| 1.1 (0.043) | 31435-80X10 | ||
| 1.3 (0.051) | 31435-80X11 | ||
| 1.5 (0.059) | 31435-80X12 | ||
| 1.7 (0.067) | 31435-80X13 | ||
| 1.9 (0.075) | 31435-80X14 | ||
|
|||