Thrust Washers For Adjusting Reverse Clutch Drum End Play
WARNING: This page is about a different variant/trim than selected.
THRUST WASHERS THICKNESS SPECIFICATIONS
| Thickness mm (in) | Part number(1) | ||
|---|---|---|---|
| 0.80 (0.0315) | 31508-80X13 | ||
| 0.95 (0.0374) | 31508-80X14 | ||
| 1.10 (0.0433) | 31508-80X15 | ||
| 1.25 (0.0492) | 31508-80X16 | ||
| 1.40 (0.0551) | 31508-80X17 | ||
| 1.55 (0.0610) | 31508-80X18 | ||
| 1.70 (0.0669) | 31508-80X19 | ||
| 1.85 (0.0728) | 31508-80X20 | ||
|
|||