Output Shaft Adjusting Shims

WARNING: This page is about a different variant/trim than selected.

OUTPUT SHAFT ADJUSTING SHIMS SPECIFICATIONS

Thickness mm (in)

Part number⁽¹⁾

0.80 (0.0315)

31438-80X60

0.84 (0.0331)

31438-80X61

0.88 (0.0346)

31438-80X62

0.92 (0.0362)

31438-80X63

0.96 (0.0378)

31438-80X64

1.00 (0.0394)

31438-80X65

1.04 (0.0409)

31438-80X66

1.08 (0.0425)

31438-80X67

1.12 (0.0441)

31438-80X68

1.16 (0.0457)

31438-80X69

1.20 (0.0472)

31438-80X70

⁽¹⁾	Always check with the Parts Department for the latest parts information.