Malfunction Indicator Lamp (MIL)

WARNING: This page is about a different variant/trim than selected.

The malfunction indicator lamp will light up when the ignition switch is turned ON without the engine running. This is for checking the lamp.
- If the malfunction indicator lamp does not light up, refer to "WARNING LAMPS ".
  [Or see "MALFUNCTION INDICATOR LAMP (MIL) " (with QR25DE), or "MALFUNCTION INDICATOR LAMP (MIL) " (with VQ35DE).]
  
  Fig 1: MIL Indication
  Courtesy of NISSAN MOTOR CO., U.S.A.
When the engine is started, the malfunction indicator lamp should go off.
If the lamp remains on, the on board diagnostic system has detected an emission-related (OBD-II) malfunction. For details, refer to "EMISSION-RELATED DIAGNOSTIC INFORMATION " (with QR25DE), or "EMISSION-RELATED DIAGNOSTIC INFORMATION " (with VQ35DE).