Malfunction Indicator Lamp (MIL): Description
WARNING: This page is about a different variant/trim than selected.
The MIL is located on the instrument panel.
- The MIL will light up when the ignition switch is turned ON without the engine running. This is a bulb check.
If the MIL does not light up, refer to "WARNING LAMPS " in Warning Lamps - Altima article, or see DTC P0650 MIL .
- When the engine is started, the MIL should go off.
If the MIL remains on, the on board diagnostic system has detected an engine system malfunction.