Diagnostic Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK DTC WITH TCM
Check DTC with TCM. Refer to "ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION ".
OK or NG
- OK : GO TO 2.
- NG : Perform trouble shooting relevant to DTC indicated.
- CHECK VEHICLE SPEED SIGNAL CIRCUIT
Refer to "VEHICLE SPEED SYSTEM ".
OK or NG
- OK : GO TO 3.
- NG : Repair or replace.
- CHECK COMBINATION METER
Check combination meter function.
Refer to "COMBINATION METER ".
- : INSPECTION END