CONSULT-III Function: Notes
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT-III can display each diagnosis item using the diagnosis test modes as shown.
CONSULT-III application items
DIAGNOSIS MODE DESCRIPTION
| Diagnosis mode | Description |
|---|---|
| ECU Identification | Displays the A/C auto amp. number. |
| Self-Diagnostic Result | Displays the diagnosis results judged by A/C auto amp. |
| Data Monitor | Displays A/C auto amp. input/output data in real time. |
| Active Test | The signals used to activate each device are forcibly supplied from A/C auto amp. |
| Work Support | Changes the setting for each system function.
|