Data Monitor
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Display item list
DISPLAY ITEM LIST
| Monitor item [Unit] | Description | |
|---|---|---|
| COMP REQ SIG | [On/Off] | Displays A/C switch ON/OFF status transmitted to other units via CAN communication |
| FAN REQ SIG | [On/Off] | Displays blower switch ON/OFF status transmitted to other units via CAN communication |
| AMB TEMP SEN | [°] | Ambient sensor value converted from ambient sensor signal received from ambient sensor |
| IN-VEH TEMP | [°] | In-vehicle sensor value converted from in-vehicle sensor signal received from in-vehicle sensor |
| INT TEMP SEN | [°C] | Intake sensor value converted from intake sensor signal received from intake sensor |
| SUNLOAD SEN | [w/m2 ] | Sunload sensor value converted from sunload sensor signal received from sunload sensor |
| AMB SEN CAL | [°C] | Ambient sensor value calculated by A/C auto amp. |
| IN-VEH CAL | [°C] | In-vehicle sensor value calculated by A/C auto amp. |
| INT TEMP CAL | [°C] | Intake sensor value calculated by A/C auto amp. |
| SUNL SEN CAL | [w/m2 ] | Sunload sensor value calculated by A/C auto amp. |
| FAN DUTY | [%] | Duty ratio of blower motor judged by A/C auto amp. |
| XM | Target discharge air temperature judged by A/C auto amp. according to the temperature setting and the value from each sensor | |
| ENG COOL TEMP | [°C] | Water temperature signal value received from ECM via CAN communication |
| VEHICLE SPEED | [Mph (km/h)] | Vehicle speed signal value received from meter via CAN communication |