LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 999 (Heater & Air Conditioning Control System) >> With Monochrome Display >> Ecu Diagnosis >> A/C Auto Amp >> Reference Value >> Values On The Diagnosis Tool

Values On The Diagnosis Tool

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CONSULT-III MONITOR ITEM

MONITOR ITEM VALUE CHART

Monitor item Condition Value/Status
COMP REQ SIG Engine: Run at idle after warming up A/C switch: ON (A/C compressor operation status) On
A/C switch: OFF Off
FAN REQ SIG Engine: Run at idle after warming up Blower fan: ON On
Blower fan: OFF Off
AMB TEMP SEN Ignition switch ON - 22 - 131°F (-30 - 55°C)
IN-VEH TEMP Ignition switch ON - 22 - 131°F (-30 - 55°C)
INT TEMP SEN Ignition switch ON - 22 - 131°F (-30 - 55°C)
SUNLOAD SEN Ignition switch ON - 0 - 1395 w/m2 (0 - 1200 kcal/m2 .h)
AMB SEN CAL Ignition switch ON - 22 -131°F (-30 - 55°C)
IN-VEH CAL Ignition switch ON - 22 -131°F (-30 - 55°C)
INT TEMP CAL Ignition switch ON - 22 -131°F (-30 - 55°C)
SUNL SEN CAL Ignition switch ON - 0 - 1395 w/m2 (0 - 1200 kcal/m2 .h)
FAN DUTY Engine: Run at idle after warming up Blower fan: ON 25 - 85%
Blower fan: OFF 0%
XM Ignition switch ON - -100 - 155
ENG COOL TEMP Ignition switch ON - Values according to coolant temperature
VEHICLE SPEED Driving - Equivalent to speedometer reading