LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 999 (Heater & Air Conditioning Control System) >> With Monochrome Display >> Component Diagnosis >> Power Supply And Ground Circuit >> A/C Auto Amp >> A/C AUTO AMP.: Component Function Check

A/C AUTO AMP.: Component Function Check

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OPERATION
  1. Press the AUTO switch, and then check that "AUTO" is shown on the display.
  2. Operate the temperature control switch (driver side). Check that the fan speed or outlet changes. (The discharge air temperature or fan speed varies depending on the ambient temperature, in-vehicle temperature, and temperature setting.)

Does it operate normally? 

YES: Inspection End.

NO: Perform trouble diagnosis for the A/C system. Refer to "A/C AUTO AMP.: DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals