LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 999 (Heater & Air Conditioning Control System) >> With Monochrome Display >> Component Diagnosis >> B2636, B2637, B2638, B2639, B2654, B2655 Mode Door Motor >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If DTC is displayed along with DTC U1000 or U1010, first diagnose the DTC U1000 or U1010. Refer to "DTC LOGIC - U1000 CAN COMM CIRCUIT " or "DTC LOGIC - U1010 CONTROL UNIT (CAN) ".
DTC DETECTION LOGIC CHART

DTC Items (CONSULT-III screen terms) Diagnostic item is detected when... Possible cause
B2636 DR VENT DOOR FAIL When the malfunctioning door position is detected at VENT position
  • Mode door motor
  • A/C auto amp.
  • Harness and connector (CAN communication line is open or shorted) (Mode door motor is open or shorted)
B2637 DR B/L DOOR FAIL When the malfunctioning door position is detected at B/L position
B2638 DR D/F1 DOOR FAIL When the malfunctioning door position is detected at FOOT position
B2639 DR DEF DOOR FAIL When the malfunctioning door position is detected at DEF position
B2654 D/F2 DOOR FAIL When the malfunctioning door position is detected at D/F position
B2655 B/L2 DOOR FAIL When the malfunctioning door position is detected at B/L2 position