LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 999 (Heater & Air Conditioning Control System) >> With Monochrome Display >> Component Diagnosis >> B2632, B2633 Air Mix Door Motor (Driver Side) >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK WITH SELF-DIAGNOSIS FUNCTION OF CONSULT-III
    1. Using CONSULT-III, perform "SELF-DIAGNOSIS RESULTS" of HVAC.
    2. Check if any DTC No. is displayed in the self-diagnosis results.
    NOTE: If DTC is displayed along with DTC U1000 or U1010, first diagnose the DTC U1000 or U1010. Refer to "DTC LOGIC - U1000 CAN COMM CIRCUIT " or "DTC LOGIC - U1010 CONTROL UNIT (CAN) ".

    Is DTC No."B2632" or "B2633" displayed? 

    YES: Perform trouble diagnosis for the air mix door motor (driver side). Refer to "DIAGNOSIS PROCEDURE ".

    NO: GO TO 2.

  2. FUNCTION INSPECTION
    1. Press the temperature control switch (driver side) until 32°C (90°F) is displayed.
    2. Check for warm air at discharge air outlets.
    3. Operate the A/C compressor.
    4. Press the temperature control switch (driver side) until 18°C (60°F) is displayed.
    5. Check for cool air at air discharge outlets.

    Does it operate normally? 

    YES: Inspection End.

    NO: Check air mix door motor (driver side) installation, and repair or replace the malfunctioning parts.

scientia non olet · About LEMON Manuals