Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SUNLOAD SENSOR

Turn ignition switch ON.
Check voltage between A/C auto amp. harness connector and ground.

TERMINAL VOLTAGE CHART

(+)		(-)
A/C auto amp.		-
Connector	Terminal	-
M37	15	Ground

Fig 1: Sunload Sensor Characteristic Curve Graph

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE: Select a place in direct sunlight when checking sunload sensor.

Is the inspection result normal?

YES: Inspection End.

NO: Replace sunload sensor. Refer to "REMOVAL AND INSTALLATION ".