Component Inspection
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK INTAKE SENSOR
- Turn ignition switch OFF.
- Disconnect intake sensor connector.
- Check resistance between intake sensor terminals.
TERMINAL RESISTANCE CHART
| Terminal | Condition | Resistance kΩ | |
|---|---|---|---|
| Temperature °C (°F) | |||
| 1 | 2 | -15 (5) | 18.63 |
| -10 (14) | 14.15 | ||
| -5 (23) | 10.86 | ||
| 0 (32) | 8.41 | ||
| 5 (41) | 6.58 | ||
| 10 (50) | 5.19 | ||
| 15 (59) | 4.12 | ||
| 20 (68) | 3.30 | ||
| 25 (77) | 2.67 | ||
| 30 (86) | 2.17 | ||
| 35 (95) | 1.78 | ||
| 40 (104) | 1.46 | ||
| 45 (113) | 1.21 | ||
Is the inspection result normal?
YES: Inspection End.
NO: Replace intake sensor. Refer to "REMOVAL AND INSTALLATION ".