LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 998 (Automatic Drive Positioner) >> Ecu Diagnosis >> Driver Seat Control Unit >> DTC Index

DTC Index

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
DTC INDEX CHART

CONSULT-III display Timing*1 Item
Current malfunction Previous malfunction
CAN COMM CIRCUIT [U1000]  0 1-39 CAN communication
CONTROL UNIT [U1010]  0 1-39 Control unit
SEAT SLIDE [B2112]  0 1-39 Seat slide motor output
SEAT RECLINING [B2113]  0 1-39 Seat reclining motor output
STEERING TILT [B2116]  0 1-39 Tilt motor output
UART COMM [B2128]  0 1-39 UART communication
EEPROM [B2130]  0 1-39 EEPROM
*1:
  • 0: Current malfunction is present
  • 1-39: Displayed if any previous malfunction is present when current condition is normal. The numeral value increases by one at each IGN ON to OFF cycle from 1 to 39. The counter remains at 39 even if the number of cycles exceeds it. However, the counter is reset to 1 if any malfunction is detected again, the normal operation is resumed and the ignition switch is turned from OFF to ON.