Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK TILT SWITCH

Turn ignition switch OFF.
Disconnect ADP steering switch (tilt switch).
Check continuity between ADP steering switch terminals.

CONTINUITY REFERENCE CHART

ADP steeering switch (tilt switch)		Condition		Continuity
Terminal		Condition		Continuity
1	4	Tilt switch (up)	Operate	Yes
	4	Tilt switch (up)	Release	No
	5	Tilt switch (down)	Operate	Yes
	5	Tilt switch (down)	Release	No

Fig 1: Checking Continuity Between ADP Steering Switch Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: Inspection End.

NO: Replace ADP steering switch (tilt switch). Refer to "REMOVAL AND INSTALLATION ".