Diagnosis Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ADP STEERING SWITCH (TILT &TELESCOPIC SWITCH) GROUND CIRCUIT

Turn ignition switch OFF.
Disconnect ADP steering switch (tilt & telescopic switch).
Check continuity between ADP steering switch (tilt & telescopic switch) and ground.

CONTINUITY REFERENCE CHART

ADP steering switch (tilt & telescopic switch)		Ground	Continuity
Connector	Terminal
M39	1		Yes

Is the inspection result normal?

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: Repair or replace harness.

Fig 1: Checking Continuity Between ADP Steering Switch (Tilt & Telescopic Switch) And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.