Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK TELESCOPIC SWITCH

Turn ignition switch OFF.
Disconnect ADP steering switch (telescopic switch).
Check continuity between ADP steering switch terminals.

CONTINUITY REFERENCE CHART

ADP steering switch (telescopic switch)		Condition		Continuity
Terminal		Condition		Continuity
1	2	Telescopic switch (forward)	Operate	Yes
	2	Telescopic switch (forward)	Release	No
	3	Telescopic switch (backward)	Operate	Yes
	3	Telescopic switch (backward)	Release	No

Is the inspection result normal?

YES: Inspection End.

NO: Replace ADP steering switch (telescopic switch). Refer to "REMOVAL AND INSTALLATION ".

Fig 1: Checking Continuity Between ADP Steering Switch Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.