LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 998 (Automatic Drive Positioner) >> Component Diagnosis >> Sliding Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SLIDING SWITCH
  1. Turn ignition switch OFF.
  2. Disconnect power seat switch LH.
  3. Check continuity between power seat switch LH terminals.
CONTINUITY REFERENCE CHART

Terminal Condition Continuity
Power seat switch LH
4 6 Sliding switch (backward) Operate Yes
Release No
7 Sliding switch (forward) Operate Yes
Release No

Is the inspection result normal? 

YES: Inspection End.

NO: Replace power seat switch LH. Refer to "DRIVER SIDE: DISASSEMBLY AND ASSEMBLY ".

Fig 1: Checking Continuity Between Power Seat Switch LH Terminals
G05877504Courtesy of NISSAN MOTOR CO., U.S.A.