Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SEAT MEMORY SWITCH

Turn ignition switch OFF.
Disconnect seat memory switch.
Check continuity between seat memory switch terminals.

CONTINUITY REFERENCE CHART

Terminal		Condition		Continuity
Seat memory switch		Condition		Continuity
4	1	Memory switch 1	Push	Yes
	1	Memory switch 1	Release	No
	2	Memory switch 2	Push	Yes
	2	Memory switch 2	Release	No
	3	Set switch	Push	Yes
	3	Set switch	Release	No

Is the inspection result normal?

Fig 1: Checking Continuity Between Seat Memory Switch Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

YES: Inspection End.

NO: Replace seat memory switch. Refer to "REMOVAL AND INSTALLATION ".