LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 998 (Automatic Drive Positioner) >> Component Diagnosis >> Lifting Switch (Rear) >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK LIFTING SWITCH (REAR)
  1. Turn ignition switch OFF.
  2. Disconnect power seat switch LH.
  3. Check continuity between power seat switch LH terminals.
CONTINUITY REFERENCE CHART

Terminal Condition Continuity
Power seat switch LH
4 9 Lifting switch rear (up) Operate Yes
Release No
8 Lifting switch rear (down) Operate Yes
Release No
Fig 1: Checking Continuity Between Power Seat Switch LH Terminals
G05877516Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal? 

YES: Inspection End.

NO: Replace power seat switch LH. Refer to "DRIVER SIDE: DISASSEMBLY AND ASSEMBLY ".