LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 998 (Automatic Drive Positioner) >> Component Diagnosis >> Door Mirror Motor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DOOR MIRROR MOTOR-I

    Check that door mirror motor does not trap foreign objects and does not have any damage.

    Refer to "EXPLODED VIEW ".

    Is the inspection result normal? 

    YES: GO TO 2

    NO: Replace door mirror actuator. Refer to "REMOVAL AND INSTALLATION ".

  2. CHECK DOOR MIRROR MOTOR-II
  1. Turn ignition switch OFF.
  2. Disconnect door mirror.
  3. Apply 12V to each power supply terminal of door mirror motor.
Fig 1: Checking Power Supply Terminal Of Door Mirror Motor
G05877600Courtesy of NISSAN MOTOR CO., U.S.A.
DOOR MIRROR CONNECTOR TERMINAL REFERENCE

Door mirror connector Terminal Operational direction
(+) (-)
D4 (LH) D107 (RH) 3 2 RIGHT
2 3 LEFT
1 3 UP
3 1 DOWN

Is the inspection result normal? 

YES: Inspection End.

NO: Replace door mirror actuator. Refer to "REMOVAL AND INSTALLATION ".