Sunroof Unit Assembly: Inspection: Weatherstrip

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Visually check weatherstrip for damage, deterioration, or deformation.
- Open glass lid assembly partially to inspect front edge of weatherstrip.
- Tilt up glass lid assembly fully to inspect sides and rear edge of weatherstrip.
If any area of the weatherstrip is found to be damaged, replace the glass lid assembly. Refer to "REMOVAL AND INSTALLATION ".
Check for leakage around glass lid assembly.
- Close glass lid assembly.
- Pour water around surface to determine area of concern.
  - For gaps or misalignment, adjust glass lid assembly to specifications. Refer to "INSPECTION ".
  - For damaged sealing surfaces, either replace glass lid assembly "REMOVAL AND INSTALLATION ", or repair the panel.