LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 997 (Roof) >> With Single Panel Sunroof >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Description

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Description

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

MEMORY RESET PROCEDURE 

  1. Please observe the following instructions at confirming the sunroof operation.
    NOTE: Do not disconnect the electronic power while the sunroof is operating or within 5 seconds after the sunroof stops (to wipe-out the memory of lid position and operating friction).
  2. Initialization of system should be conducted after the following conditions.
    • When the sunroof motor is changed.
    • When the sunroof does not operate normally (incomplete initialization conditions).