LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 997 (Roof) >> With Dual Panel Sunroof >> Ecu Diagnosis >> Sunroof Motor Assembly >> Reference Value >> Physical Values

Physical Values

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
SUNROOF MOTOR ASSEMBLY PHYSICAL VALUES

Terminal No. (Wire color) Description Condition Voltage (V) (Approx.)
+ - Signal name Input/Output
1 (B) Ground Ground - - 0
2 (O) Ground Ground - - 0
3 (R) Ground RAP signal Input Ignition switch ON Battery voltage
Within 45 second after ignition switch is turned to OFF. Battery voltage
When driver side or passenger side door is opened during retained power operation or retained power operation is finished. 0
4 (Y) Ground Sunroof switch signal (PUSH) Input Sunroof switch PUSH 0
Other than above Battery voltage
5 (LG) Ground Sunroof switch signal (OPEN) Input Sunroof switch OPEN (1st and 2nd) 0
Other than above Battery voltage
6 (L) Ground Battery voltage - - Battery voltage
7 (P) Ground Communication line Input/Output Ignition switch ON
G05893745Courtesy of NISSAN MOTOR CO., U.S.A.
8 (BR) Ground Vehicle speed signal (2-pulse) Input Speed meter operated [When vehicle speed is approx. 40km/h (25MPH)]
G04876940Courtesy of NISSAN MOTOR CO., U.S.A.
9 (W) Ground Sunroof switch signal (2nd) Input Sunroof switch OPEN or CLOSE (2nd) 0
Other than above Battery voltage
10 (V) Ground Sunroof switch signal (CLOSE) Input Sunroof switch CLOSE (1st and 2nd) 0
Other than above Battery voltage