Diagnosis Procedure
- PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".
Is the inspection result normal?
YES: Inspection End.
NO: GO TO 2
- CHECK ENCODER
Check encoder. Refer to "DRIVER SIDE: COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: Refer to "INTERMITTENT INCIDENT ".
NO: Repair or replace the malfunctioning parts.
- PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".
Is the inspection result normal?
YES: Inspection End.
NO: GO TO 2
- CHECK ENCODER
Check encoder. Refer to "DRIVER SIDE: COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: Refer to "INTERMITTENT INCIDENT ".
NO: Repair or replace the malfunctioning parts.