Diagnosis Procedure
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".
Is the inspection result normal?
YES: Inspection End.
NO: GO TO 2
- CHECK ENCODER CIRCUIT
Check encoder circuit. Refer to "REAR LH: COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: Refer to "INTERMITTENT INCIDENT ".
NO: Repair or replace the malfunctioning parts.